Users Guide
Table 26. Dell EMC S-Series, Z-Series, M-Series, and C-Series Switch Groups
Alert Group Description
AccessControlLists Provides status information arising from problems during installation of the Access Control Lists
entries due to a hardware failure or a lack of storage space.
Adjacency Provides information due to Adjacency related changes.
BGPTask Provides information about the status of the Border Gateway Protocol.
Card Provides information about the Card operation status.
Controller Provides information about the Controller operation status.
CopyCong Provides information when a Copy operation is completed.
ETSModule Provides any change in the ETS Module status.
ETSStatus Provides the Enhanced Transmission Selection operation status.
Fan Provides information about how well a fan is functioning.
FanTray Provides information about the status of the fan tray.
FCOENodes Provides information about the threshold status of the FCOE Nodes.
FiberChannelForwarders Provides information about the threshold status of the ber channel forwarders.
FlowTable Provides information about the ow table status.
LACPState Provides a change in the LCAP state for one of the member ports of the aggregation link detected
by an agent.
MAC Provides status information about a MAC address.
MacNotication Generated when the MAC address is detected for the rst time in the device.
Memory Provides Memory Utilization status.
NetAlarm Generated when the Bit error rate of the interface is changed or when the retrain event is
observed on an interface.
NetSysLog Provides information about the availability of the server syslog.
PFCStatus Provides information about Priority-based Flow Control operation.
PowerSupply Provides the power supply information of the system.
Processor Provides information about the processor details of the system.
ProductGlobalStatusChange Provides information when the Device Global Status changes.
RBridge Provides the RBridge operational status information.
RPM Provides the RPM operational status information.
Session Indicates the threshold status of the number of sessions.
SFM Indicates the Switch Fabric Module operational status.
SNMPAgent Indicates that an SNMP Agent has denied an SNMP request based on the IP ACL rules and is
generated by the agent.
SpanningTree Indicates the spanning tree status in the CIST or in any MSTI.
SRAM Provides the Operational status of the SRAM.
StackPort Indicates the stack port operational status.
28 Using the Dell EMC OpenManage Connection for IBM Tivoli Netcool/OMNIbus