Users Guide
Alert Group Description
StorageManagement Provides information about communication loss with controller, shared storage
availability, and RAID Status.
StoragePhysicalDisk Provides the physical disk details of the storage device.
StoragePowerSupply Provides the power supply information of the storage device.
StorageTemperatureProbe Provides temperature information of an enclosure.
StorageVirtualDisk Provides the details of the storage virtual disk.
SystemEventLog Provides information about the event logs of the system.
TemperatureProbe Provides temperature information of a system board, memory module, fan failure, and
inlet of a system.
TestTrap Test Trap.
VoltageProbe Provides the voltage details of the processor module and the system board.
Dell EMC SC-Series Alert Groups
The Dell EMC SC-Series alerts are the events generated by Dell EMC SC-Series Storage Arrays and displayed on the Netcool/OMNIbus
console. The following table lists the Dell EMC SC-Series alert groups.
Table 24. Dell EMC SC-Series Alert Groups
Alert Group Description
ControllerStatus Provides status of the controllers in case of any change in its current status.
ControllerComponentStatus Provides status of the controller component in case of any change in its current status.
CacheStatus Provides status of the cache in case of any change in its current status.
DiskFolderStatus Provides status of the disk folders in case of any change in its current status.
DiskStatus Provides status of the Dell EMC SC-Series disks in case of any change in its current status.
EnclosureComponentStatus Provides status of the components in the enclosures. Enclosure alerts provide the status information of
enclosure, alarm, asset tag, service tag, and so on.
EnclosureStatus Provides status of the Dell EMC SC-Series enclosures in case of any change in its current status.
LocalPortConditionStatus Provides status of the local front-end Port Condition in case of any change in its current status.
Miscelleneous This alert group is used for all the Dell EMC SC-Series alerts that have no other specic trap denition
associated with them.
MonitoredUPSStatus Provides status of the monitored UPS in case of any change in its current status.
ServerStatus Provides status of the managed servers in case of any change in its current status.
SIDeviceStatus Provides status of the SCSI Initiator device in case of any change in its current status.
Test Test trap.
VolumeStatus Provides status of the disk volumes in case of any change in its current status.
Using the Dell EMC OpenManage Connection for IBM Tivoli Netcool/OMNIbus 25