Users Guide

Alert Group Description
StorageEnclosure Provides information about the performance of the storage enclosure.
StorageFan Provides the fan details of the storage device.
StorageManagementStatus Indicates that the storage device status is not determined.
StoragePhysicalDisk Indicates that the storage device status is not determined.
StoragePowerSupply Provides the power supply information of the storage device.
StorageSolidstateDrive Provides information of the threshold value of Solid State Drive.
StorageTemperatureProbe Provides temperature information of an enclosure.
SystemEventLog Provides information about the event logs of the system.
SystemHealth Provides information of the system security health.
SystemInfo Provides the details of the host system.
StoragePhysicalDisk Provides the physical disk details of the storage device.
StorageVirtualDisk Provides the details of the storage virtual disk.
TemperatureProbe Provides temperature information of a system board, memory module, fan failure, and inlet of a system.
TemperatureStatistics Provides temperature statistics information of the system inlet.
UserActions Provides information about all user action required for certain events.
vFlash Provides details of removable ash media and storage device.
vFlashAbsent Provides information if removable ash media is absent.
VirtualDisk Provides information on the Virtual Disk updates.
VoltageProbe Provides the voltage details of the processor module and system board.
Updates Provides information on the Job Status.
Dell EMC DRAC5 and iDRAC6 Alert Groups
The Dell EMC DRAC5 and iDRAC6 alerts are the events generated by Dell EMC DRAC5 or iDRAC6 devices and are displayed on the
Netcool/OMNIbus console. The following table lists the Dell EMC DRAC5 and iDRAC6 alert groups.
Table 22. Dell EMC DRAC5 and iDRAC6 Alert Groups
Alert Group Description
Authentication Provides status of the RAC Authentication failures and the threshold limit.
Battery Provides status information for batteries.
ESMCOmmunication Provides the status of the RAC communication with the Baseboard Management Controller.
Power Provides the information of the system power supply.
SELThreshold Provides the status information of the System Event Logs capacity.
SystemEventLog Provides the status of a new event arrival in the System Event Logs.
TemperatureProbe Provides temperature information of a system board, memory module, fan failure, and inlet of a system.
TestTrap Test trap.
VoltageProbe Provides the voltage details of the processor module and the system board.
Using the Dell EMC OpenManage Connection for IBM Tivoli Netcool/OMNIbus 23