Users Guide

Alert Group Description
MemoryDevice Provides status and warning information for memory modules present in a particular
system.
Miscellaneous-AutomaticSystemRecovery Provides information when an automatic system recovery action is performed when the
operating system stops responding.
Miscellaneous-SNMPAgentKey Generated when the SNMP Agent Key is missing.
Miscellaneous-SystemPeakPowerNewPeak Provides information when the system peak power sensor detects a new peak value.
Miscellaneous-SystemSoftwareEvent Provides information when OMSA detects a critical system software generated event in
the IPMI System Event Log (SEL), which could have been resolved.
Miscellaneous-SystemUp Provides information when OMSA completes initialization.
Miscellaneous-ThermalShutdown Provides information when a system shuts down as the temperature exceeds the
maximum threshold.
Miscellaneous-UnmonitoredSensors Provides information of the alerts generated from unmonitored sensors.
Miscellaneous-UserHostSystemReset Provides information when user requests a host system control action to reboot, power
o, or power cycle the system.
PowerSupply Provides status and warning information for power supplies present in a particular
chassis.
ProcessorDeviceStatus Provides status and warning information for processors in a particular chassis.
Redundancy Provides the redundancy unit information.
SDCardDevice Provides status and error information for Secure Digital (SD) card devices present in a
chassis.
TemperatureProbe Provides help to protect critical components when temperatures exceed in a chassis.
VoltageProbe Provides status and warning information for voltage sensors in a particular chassis.
Dell EMC OMSS Alert Groups
The OpenManage Storage Management (OMSS) alerts are the events generated by OMSS and displayed on the Netcool/OMNIbus
console. The following table lists the OMSS alert groups.
Table 19. Dell EMC OMSS Alert Groups
Alert Group Description
Battery Provides status information of the batteries in the controller. Battery alerts provide information about
battery reconditioning, charging, temperature, replacement, learn cycle, learn mode, operation, and so
on.
Channel Provides the addition and removal status, conguration errors, and status for pluggable devices, such
as memory cards.
Controller Provides status of the storage controller tasks. Controller alerts provide information about rebuild rate,
alarm status, conguration status, background initialization rate, patrol read rate, check consistency
rate, redundant path, foreign conguration, disk status, bad blocks, ECC errors, DKM certicate upload,
self-signed certicate creation and upload, and so on.
EMM Provides status of the Enclosure Management Module (EMM) of the controllers.
Using the Dell EMC OpenManage Connection for IBM Tivoli Netcool/OMNIbus 19