Users Guide

capacity: 200
raid_init_operation: "None"
-name: View all volume details
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_password: "password"
state: "view"
-name: View specific volume details
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_password: "password"
state: "view"
controller_id: "RAID.Slot.1-1"
volume_id: "Disk.Virtual.0:RAID.Slot.1-1"
-name: Delete single volume
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_password: "password"
state: "delete"
volumes:
- name: "volume_1"
-name: Delete multiple volume
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_password: "password"
state: "delete"
volumes:
- name: "volume_1"
- name: "volume_2"
Configure Collect System Inventory on Restart
Module: dellemc_idrac_lc_attributes
Synopsis
This module is responsible for enabling or disabling of Collect System Inventory on Restart (CSIOR) property for all iDRAC
or LC jobs. When you enable the CSIOR property, hardware inventory and part configuration information are discovered and
compared with previous system inventory information on every system restart.
Check_mode support: Yes
Options
Table 19. dellemc_idrac_lc_attributes
Parameter/aliases Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA CIFS or NFS network share or a local path
Modules for iDRAC 33