Users Guide

duplex_mode: "Full"
nic_mtu: "1500"
ip_address: "x.x.x.x"
enable_dhcp: "Enabled"
dns_from_dhcp: "Enabled"
enable_ipv4: "Enabled"
static_dns_1: "x.x.x.x"
static_dns_2: "x.x.x.x"
static_gateway: "None"
static_net_mask: "None"
Configure BIOS
This module is deprecated and replaced with idrac_bios.
Module: dellemc_configure_bios
Synopsis
This module configures the BIOS attributes for PowerEdge servers.
Check_mode support: Yes
Options
Table 82. dellemc_configure_bios
Parameter/
aliases
Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name No NA NA
CIFS or NFS network share or a local
path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if user
is part of a domain else 'user'. This
option is mandatory for CIFS Network
share.
share_password/
share_pwd
No NA NA
Network share user password. This
option is mandatory for CIFS Network
share.
share_mnt No NA NA
Local mount path of the network share
with read-write permission for Ansible
user. This option is mandatory for CIFS
or NFS Network share.
boot_mode No NA
● Bios
● Uefi
(deprecated) Configures the boot mode
to BIOS or UEFI.
NOTE: This option has been
deprecated, and will be removed
in the later version. Please use
the I(attributes) for BIOS attributes
configuration instead.
NOTE: I(boot_mode) is mutually
exclusive with I(boot_sources).
Deprecated modules 135