Users Guide

"Severity": "Critical",
"Resolution": "Retry the operation. If the issue persists, contact your system
administrator."
}
]
}
}
Example
-name: Configure time zone and NTP on iDRAC
dellemc.openmanage.idrac_timezone_ntp:
idrac_ip: "190.168.0.1"
idrac_user: "user_name"
idrac_password: "user_password"
share_name: "user_name:/share"
share_password: "share_password"
share_user: "user_name"
share_mnt: "/mnt/share"
setup_idrac_timezone: "UTC"
enable_ntp: Enabled
ntp_server_1: "190.168.0.1"
ntp_server_2: "190.168.0.2"
ntp_server_3: "190.168.0.3"
Configure iDRAC eventing
Module: dellemc_configure_idrac_eventing
Synopsis
This module configures iDRAC eventing related attributes.
Check_mode support: Yes
Options
Table 7. dellemc_configure_idrac_eventing
Parameter/aliases Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA
CIFS or NFS Network share or a
local path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if
user is part of a domain else 'user'.
This option is mandatory for CIFS
Network share.
share_password/
share_pwd
No NA NA
Network share user password. This
option is mandatory for CIFS
Network share.
share_mnt No NA NA
Local mount path of the network
share with read-write permission
for Ansible user. This option is
mandatory for CIFS or NFS Network
share.
destination_number No None NA Destination number for SNMP Trap
24 Modules for iDRAC