Users Guide

● Configure iDRAC network
Configure iDRAC users
Module: dellemc_configure_idrac_users
Synopsis
This module creates, modifies or deletes an iDRAC local user.
Check_mode support: Yes
Options
Table 15. dellemc_configure_idrac_users
Parameter/aliases Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA
CIFS or NFS Network share or a local
path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if user is
part of a domain else 'user'. This option is
mandatory for CIFS Network share.
share_password/
share_pwd
No NA NA
Network share user password. This option
is mandatory for CIFS Network share.
share_mnt No NA NA
Local mount path of the network share
with read-write permission for Ansible
user. This option is mandatory for CIFS or
NFS Network share.
action No create
● create
● delete
● modify
This value decides whether to create or
delete or modify iDRAC user
user_name No NA NA
Provide the username to be created or
deleted or modified
user_password No NA NA
Provide the password for the user to be
created or modified
privilege_users No NA
● NoAccess
● Readonly
● Operator
● Administrator
Privilege user access is configurable
ipmilanprivilege_users No NA
● No_Access
● Administrator
● Operator
● User
IPMI Lan Privilege user access is
configurable
ipmiserialprivilege_user
s
No NA
● No_Access
● Administrator
● Operator
● User
IPMI Serial Privilege user access is
configurable
NOTE: This parameter is not
supported by PowerEdge Modular
servers.
Modules for iDRAC 23