Users Guide

- name: "volume_2"
volume_type: "RAID 5"
span_length: 3
span_depth: 1
drives:
location: [7,3,5]
disk_cache_policy: "Disabled"
write_cache_policy: "WriteBack"
read_cache_policy: "NoReadAhead"
stripe_size: 131072
capacity: 200
raid_init_operation: "None"
-name: View all volume details
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_pwd: "password"
state: "view"
-name: View specific volume details
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_pwd: "password"
state: "view"
controller_id: "RAID.Slot.1-1"
volume_id: "Disk.Virtual.0:RAID.Slot.1-1"
-name: Delete single volume
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_pwd: "password"
state: "delete"
volumes:
- name: "volume_1"
-name: Delete multiple volume
dellemc_idrac_storage_volume:
idrac_ip: "192.168.0.1"
idrac_user: "username"
idrac_pwd: "password"
state: "delete"
volumes:
- name: "volume_1"
- name: "volume_2"
Configure Collect System Inventory on Restart
Module: dellemc_idrac_lc_attributes
Synopsis
This module is responsible for enabling or disabling of Collect System Inventory on Restart (CSIOR) property for all iDRAC
or LC jobs. When you enable the CSIOR property, hardware inventory and part configuration information are discovered and
compared with previous system inventory information on every system restart.
Check_mode support: Yes
Options
Table 28. dellemc_idrac_lc_attributes
Parameter Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
36 Modules for iDRAC