Users Guide

Table 36. Return Values
Name Description Returned Type Sample
Power state of a
server
Configures the power
control options on a
PowerEdge server
Success String
https://github.com/dell/Dell-EMC-Ansible-
Modules-for-iDRAC/blob/master/samples/
dellemc_change_power_state.md
Example
-name: Change Power State
dellemc_change_power_state:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_pwd: "xxxxxxxx"
change_power: "xxxxxxx"
Resetting iDRAC
Module: dellemc_idrac_reset
Synopsis
You can reset the iDRAC using this module.
Check_mode support: Yes
Options
Table 37. dellemc_idrac_reset
Parameter Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_pwd Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
Table 38. Return Values
Name Description Returned Type Sample
Reset
iDRAC
Resets the iDRAC Success String https://github.com/dell/Dell-EMC-Ansible-
Modules-for-iDRAC/blob/master/samples/
dellemc_idrac_reset.md
Example
-name: Reset iDRAC
dellemc_idrac_reset:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_pwd: "xxxxxxxx"
idrac_port: "xxx"
Viewing LC Job Status
Module: dellemc_get_lc_job_status
Synopsis
You can view the iDRAC or LC job status using this module. To view information about a job status, a job id is required. After a
job is initiated, the system stages the job request information and sends a job id back to the system. You can query the progress
and status of the job by using the job id.
Server Administration Tasks
37