Users Guide

Table 23. dellemc_configure_raid (continued)
Parameter Required Default Choices Comments
● Adaptive
stripe_size No 65536 NA
Provide stripe size value in
multiples of 64 * 1024
controller_fqdd Yes NA NA
Fully Qualified Device Descriptor
(FQDD) of the storage controller,
for e.g. RAID.Integrated.1-1
media_type No HDD
● HDD
● SSD
Media type
bus_protocol No SATA
● SAS
● SATA
Bus protocol
state Yes NA
● present
● absent
● If the value is 'present', the
module will perform 'create'
operations
● If the value is 'absent', the
module will perform 'remove'
operations
Table 24. Return Values
Name Description Returned Type Sample
RAID
configuration
Configures the RAID
configuration attributes
Success String
https://github.com/dell/Dell-EMC-Ansible-
Modules-for-iDRAC/blob/master/samples/
dellemc_configure_raid.md
Example
-name: Configure the RAID attributes
dellemc_configure_raid:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_pwd: "xxxxxxxx"
share_name: "xx.xx.xx.xx:/share"
share_pwd: "xxxxxxxx"
share_user: "xxxx"
share_mnt: "xxxxxx"
controller_fqdd: "xxxxxxxx"
vd_name: "xxxxxx"
Configuring storage volume
Module: dellemc_idrac_storage_volume
Synopsis
This module hosts the RAID configuration related attributes.
Check_mode support: Yes
Options
Table 25. dellemc_idrac_storage_volume
Parameter Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_pwd Yes NA NA iDRAC user password
Configuring PowerEdge Servers 27