Users Guide

Configuring iDRAC Network
Module: dellemc_configure_idrac_network
Synopsis
This module configures the iDRAC networking attributes.
Check_mode support: Yes
Options
Table 19. dellemc_configure_idrac_network
Parameter Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_pwd Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA CIFS or NFS Network share or a local path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if user is
part of a domain else 'user'. This option is
mandatory for CIFS Network share.
share_pwd No NA NA
Network share user password. This option
is mandatory for CIFS Network share.
share_mnt No NA NA
Local mount path of the network share
with read-write permission for Ansible user.
This option is mandatory for CIFS or NFS
Network share.
setup_idrac_nic_vlan No NA NA
Configuring the VLAN-related setting for
iDRAC
register_idrac_on_dns No NA
● Enabled
● Disabled
Registering Domain Name System for
iDRAC
dns_idrac_name No NA NA DNS Name for iDRAC
auto_config No NA
● Enabled
● Disabled
Automatically creates the records for DNS
static_dns No NA NA Static configuration for DNS
vlan_id No None NA Configuring the VLAN ID for iDRAC
vlan_priority No None NA Configuring the VLAN priority for iDRAC
enable_nic No NA
● Enabled
● Disabled
Whether to Enable or Disable Network
Interface Controller for iDRAC
nic_selection No NA
● Dedicated
● LOM1
● LOM2
● LOM3
● LOM4
Selecting Network Interface Controller
types for iDRAC
failover_network No NA
● ALL
● LOM1
● LOM2
● LOM3
● LOM4
Failover Network Interface Controller types
for iDRAC
20 Configuring PowerEdge Servers