Users Guide

Table 11. dellemc_configure_idrac_users (continued)
idrac_pwd Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA CIFS or NFS Network share
share_user Yes NA NA
Network share user in the format
'user@domain' if user is part of a
domain else 'user'
share_pwd Yes NA NA Network share user password
share_mnt Yes NA NA
Local mount path of the network share
with read-write permission for ansible
user
action No create
● create
● delete
● modify
This value decides whether to create or
delete or modify iDRAC user
user_name No NA NA
Provide the username to be created or
deleted or modified
user_password No NA NA
Provide the password for the user to be
created or modified
privilege_users No NA
● NoAccess
● Readonly
● Operator
● Administrator
Privilege user access is configurable
ipmilanprivilege_users No NA
● No_Access
● Administrator
● Operator
● User
IPMI Lan Privilege user access is
configurable
ipmiserialprivilege_user
s
No NA
● No_Access
● Administrator
● Operator
● User
IPMI Serial Privilege user access is
configurable
NOTE: This parameter is not
supported by PowerEdge Modular
servers.
enable_users No NA
● Enabled
● Disabled
Enabling or Disabling the new iDRAC
user
solenable_users No NA
● Enabled
● Disabled
Enabling or Disabling SOL for iDRAC
user
protocolenable_users No NA
● Enabled
● Disabled
Enabling or Disabling protocol for iDRAC
user
authenticationprotocol
_users
No NA
● T_None
● SHA
● MD5
Configuring authentication protocol for
iDRAC user
privacyprotocol_users No NA
● T_None
● DES
● AES
Configuring privacy protocol for iDRAC
user
Table 12. Return Values
Name Description Returned Type Sample
iDRAC users
Configures the iDRAC users
attributes
Success String
https://github.com/dell/Dell-EMC-Ansible-
Modules-for-iDRAC
16 Configuring PowerEdge Servers