Users Guide

dns_from_dhcp: "Enabled"
enable_ipv4: "Enabled"
static_dns_1: "x.x.x.x"
static_dns_2: "x.x.x.x"
static_gateway: "None"
static_net_mask: "None"
Congure BIOS
Module: dellemc_congure_bios
Synopsis
This module congures the BIOS attributes for PowerEdge servers.
Check_mode support: Yes
Options
Table 23. dellemc_congure_bios
Parameter Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_pwd Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name No NA NA CIFS or NFS network share or a local path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if user is
part of a domain else 'user'. This option is
mandatory for CIFS Network share.
share_pwd No NA NA
Network share user password. This option
is mandatory for CIFS Network share.
share_mnt No NA NA
Local mount path of the network share with
read-write permission for Ansible user. This
option is mandatory for CIFS or NFS
Network share.
boot_mode No NA
• Bios
• Ue
(deprecated) Congures the boot mode to
BIOS or UEFI.
NOTE: This option has been
deprecated, and will be removed in
the later version. Please use the
I(attributes) for BIOS attributes
conguration instead.
NOTE: I(boot_mode) is mutually
exclusive with I(boot_sources).
30 Modules for iDRAC