Users Guide

Parameter Required Default Choices Comments
duplex_mode No NA
• Full
• Half
Transmission of data Network Interface
Controller types for iDRAC
nic_mtu No None NA NIC Maximum Transmission Unit
ip_address No NA NA IP Address needs to be dened
enable_dhcp No NA NA
Whether to Enable or Disable DHCP Protocol
for iDRAC
dns_from_dhcp No NA
• Enabled
• Disabled
Specifying Domain Name System from
Dynamic Host Conguration Protocol
enable_ipv4 No NA
• Enabled
• Disabled
Whether to Enable or Disable IPv4
conguration
static_dns_1 No NA NA Specify Domain Name System Conguration
static_dns_2 No NA NA Specify Domain Name System Conguration
static_gateway No None NA Interfacing the network with another protocol
static_net_mask No None NA Determine whether IP address belongs to host
Table 20. Return Values
Name Description Returned Type Sample
iDRAC network
Congures the iDRAC network
attributes
Success String
https://github.com/dell/Dell-EMC-Ansible-Modules-
for-iDRAC/blob/master/samples/
dellemc_congure_idrac_network.md
Example
-name: Configure the iDRAC network attributes
dellemc_configure_idrac_network:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_pwd: "xxxxxxxx"
share_name: "xx.xx.xx.xx:/share"
share_pwd: "xxxxxxxx"
share_user: "xxxx"
share_mnt: "/mnt/share"
register_idrac_on_dns: "Enabled'
dns_idrac_name: "None"
auto_config: "None"
static_dns: "None"
setup_idrac_nic_vlan: "Enabled"
vlan_id: "0"
vlan_priority: "1"
enable_nic: "Enabled"
nic_selection: "Dedicated"
failover_network: "T_None"
auto_detect: "Disabled"
auto_negotiation: "Enabled"
network_speed: "T_1000"
duplex_mode: "Full"
nic_mtu: "1500"
ip_address: "x.x.x.x"
enable_dhcp: "Enabled"
24
Conguring PowerEdge Servers