Users Guide

description: Details of a http error.
returned: on http error
sample: {
"error": {
"@Message.ExtendedInfo": [
{
"Message": "Cannot run the method because the requested HTTP method is not
allowed.",
"MessageArgs": [],
"[e-mail]": 0,
"MessageId": "iDRAC.1.6.SYS402",
"RelatedProperties": [],
"[e-mail]": 0,
"Resolution": "Enter a valid HTTP method and retry the operation. For information
about
valid methods, see the Redfish Users Guide available on the support site.",
"Severity": "Informational"
}
],
"code": "Base.1.0.GeneralError",
"message": "A general error has occurred. See ExtendedInfo for more information"
}
}
Examples
- name: Assign [a] dedicated hot spare.
idrac_redfish_storage_controller:
baseuri: "192.168.0.1:443"
username: "user_name"
password: "user_password"
volume_id: "Disk.Virtual.0:RAID.Slot.1-1"
target: "Disk.Bay.0:Enclosure.Internal.0-1:RAID.Slot.1-1"
tags:
- assign_dedicated_hot_spare
- name: Assign [a] global hot spare.
idrac_redfish_storage_controller:
baseuri: "192.168.0.1:443"
username: "user_name"
password: "user_password"
target: "Disk.Bay.0:Enclosure.Internal.0-1:RAID.Slot.1-1"
tags:
- assign_global_hot_spare
- name: Set [a] controller encryption key.
idrac_redfish_storage_controller:
baseuri: "192.168.0.1:443"
username: "user_name"
password: "user_password"
command: "SetControllerKey"
controller_id: "RAID.Slot.1-1"
key: "PassPhrase@123"
key_id: "mykeyid123"
tags:
- set_controller_key
- name: Rekey in LKM mode.
idrac_redfish_storage_controller:
baseuri: "192.168.0.1:443"
username: "user_name"
password: "user_password"
command: "ReKey"
controller_id: "RAID.Slot.1-1"
key: "PassPhrase@123"
key_id: "mykeyid123"
old_key: "OldPassPhrase@123"
tags:
- rekey_lkm
- name: Rekey in SEKM mode.
idrac_redfish_storage_controller:
baseuri: "192.168.0.1:443"
54
Modules for iDRAC