Users Guide

Table 39. Return Values
Name Description Returned Type Sample
System
Inventory
Displays the PowerEdge Server
System Inventory
Success String
https://github.com/dell/Dell-EMC-Ansible-Modules-
for-iDRAC/blob/master/samples/
dellemc_get_system_inventory.md
Example
-name: Get System Inventory
dellemc_get_system_inventory:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_password:"xxxxxxxx"
Server administration tasks
This section describes the tasks that you can run using OpenManage Ansible Modules. Following are the tasks:
• Configure the power state on the PowerEdge servers
• Reset iDRAC
• View LC job status
• Export LC logs
• Delete LC job
• Delete LC job queue
• Configure System Lockdown Mode
Configure the power state on the PowerEdge servers
Module: dellemc_change_power_state
Synopsis
This module configures the power control options on a PowerEdge server. You can run this module:
• To turn on the server.
• To turn off the server.
• To reboot the server.
• For hard reset of the server.
Check_mode support: Yes
Options
Table 40. dellemc_change_power_state
Parameter/aliases Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
change_power Yes NA
• On
• ForceOff
• GracefulRestart
• GracefulShutdown
• PushPowerButton
• Nmi
Desired power state
46 Modules for iDRAC