Users Guide

share_user: "xxxxx"
share_password: "xxxxxxxx"
share_mnt: "/mnt/share"
csior: "xxxxxxx"
Configure syslog
Module: dellemc_setup_idrac_syslog
Synopsis
This module enables or disables syslog parameters for iDRAC.
Check_mode support: Yes
Options
Table 32. dellemc_setup_idrac_syslog
Parameter/aliases Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA
CIFS or NFS Network share or a
local path
share_user No NA NA
Network share user in the
format 'user@domain' or
'domain\user' if user is part of a
domain else 'user'. This option is
mandatory for CIFS Network
share.
share_password/
share_pwd
No NA NA
Network share user password.
This option is mandatory for
CIFS Network share.
share_mnt No NA NA
Local mount path of the
network share with read-write
permission for Ansible user. This
option is mandatory for CIFS or
NFS Network share.
syslog Yes NA
• Enabled
• Disabled
Whether to Enable or Disable
iDRAC syslog
Table 33. Return Values
Nam Description Returned Type Sample
iDRAC Syslog
Configures iDRAC Syslog
parameters
Success String
https://github.com/dell/Dell-EMC-Ansible-
Modules-for-iDRAC/blob/master/samples/
dellemc_setup_idrac_syslog.md
Example
-name: Configure iDRAC Syslog Parameters
dellemc_setup_idrac_syslog:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_password:"xxxxxxxx"
share_name: "xx.xx.xx.xx:/share"
42
Modules for iDRAC