Users Guide

idrac_user: "xxxx"
idrac_password: "xxxxxxxx"
share_name: "xx.xx.xx.xx:/share"
share_password: "xxxxxxxx"
share_user: "xxxx"
share_mnt: "/mnt/share"
register_idrac_on_dns: "Enabled'
dns_idrac_name: "None"
auto_config: "None"
static_dns: "None"
setup_idrac_nic_vlan: "Enabled"
vlan_id: "0"
vlan_priority: "1"
enable_nic: "Enabled"
nic_selection: "Dedicated"
failover_network: "T_None"
auto_detect: "Disabled"
auto_negotiation: "Enabled"
network_speed: "T_1000"
duplex_mode: "Full"
nic_mtu: "1500"
ip_address: "x.x.x.x"
enable_dhcp: "Enabled"
dns_from_dhcp: "Enabled"
enable_ipv4: "Enabled"
static_dns_1: "x.x.x.x"
static_dns_2: "x.x.x.x"
static_gateway: "None"
static_net_mask: "None"
Configure BIOS
Module: dellemc_configure_bios
Synopsis
This module configures the BIOS attributes for PowerEdge servers.
Check_mode support: Yes
Options
Table 25. dellemc_configure_bios
Parameter/aliases Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name No NA NA CIFS or NFS network share or a local path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if user is
part of a domain else 'user'. This option is
mandatory for CIFS Network share.
share_password/
share_pwd
No NA NA
Network share user password. This option
is mandatory for CIFS Network share.
share_mnt No NA NA
Local mount path of the network share
with read-write permission for Ansible user.
This option is mandatory for CIFS or NFS
Network share.
32 Modules for iDRAC