Users Guide

Table 23. dellemc_configure_idrac_network (continued)
Parameter/aliases Required Default Choices Comments
nic_selection No NA
• Dedicated
• LOM1
• LOM2
• LOM3
• LOM4
Selecting Network Interface Controller types
for iDRAC
failover_network No NA
• ALL
• LOM1
• LOM2
• LOM3
• LOM4
• T_None
Failover Network Interface Controller types
for iDRAC
auto_detect No NA
• Enabled
• Disabled
Auto detect Network Interface Controller
types for iDRAC
auto_negotiation No NA
• Enabled
• Disabled
Auto negotiation of Network Interface
Controller for iDRAC
network_speed No NA
• T_10
• T_100
• T_1000
Network speed for Network Interface
Controller types for iDRAC
duplex_mode No NA
• Full
• Half
Transmission of data Network Interface
Controller types for iDRAC
nic_mtu No None NA NIC Maximum Transmission Unit
ip_address No NA NA IP Address needs to be defined
enable_dhcp No NA NA
Whether to Enable or Disable DHCP Protocol
for iDRAC
dns_from_dhcp No NA
• Enabled
• Disabled
Specifying Domain Name System from
Dynamic Host Configuration Protocol
enable_ipv4 No NA
• Enabled
• Disabled
Whether to Enable or Disable IPv4
configuration
static_dns_1 No NA NA Specify Domain Name System Configuration
static_dns_2 No NA NA Specify Domain Name System Configuration
static_gateway No None NA Interfacing the network with another protocol
static_net_mask No None NA Determine whether IP address belongs to host
Table 24. Return Values
Name Description Returned Type Sample
iDRAC network
Configures the iDRAC network
attributes
Success String
https://github.com/dell/Dell-EMC-Ansible-Modules-
for-iDRAC/blob/master/samples/
dellemc_configure_idrac_network.md
Example
-name: Configure the iDRAC network attributes
dellemc_configure_idrac_network:
idrac_ip: "xx.xx.xx.xx"
Modules for iDRAC
31