Users Guide

tls_protocol: "TLS_1_2_Only"
timeout: "1800"
snmp_enable: "Enabled"
snmp_protocol: "SNMPv3"
community_name: "test"
alert_port: "None"
discovery_port: "162"
trap_format: "None"
Configure iDRAC network
Module: dellemc_configure_idrac_network
Synopsis
This module configures the iDRAC networking attributes.
Check_mode support: Yes
Options
Table 23. dellemc_configure_idrac_network
Parameter/aliases Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA CIFS or NFS Network share or a local path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if user is part
of a domain else 'user'. This option is
mandatory for CIFS Network share.
share_password/
share_pwd
No NA NA
Network share user password. This option is
mandatory for CIFS Network share.
share_mnt No NA NA
Local mount path of the network share with
read-write permission for Ansible user. This
option is mandatory for CIFS or NFS Network
share.
setup_idrac_nic_vlan No NA NA
Configuring the VLAN-related setting for
iDRAC
register_idrac_on_dns No NA
• Enabled
• Disabled
Registering Domain Name System for iDRAC
dns_idrac_name No NA NA DNS Name for iDRAC
auto_config No NA
• Enabled
• Disabled
Automatically creates the records for DNS
static_dns No NA NA Static configuration for DNS
vlan_id No None NA Configuring the VLAN ID for iDRAC
vlan_priority No None NA Configuring the VLAN priority for iDRAC
enable_nic No NA
• Enabled
• Disabled
Whether to Enable or Disable Network
Interface Controller for iDRAC
30 Modules for iDRAC