Users Guide

Table 15. dellemc_configure_idrac_users (continued)
Parameter/aliases Required Default Choices Comments
idrac_password/
idrac_pwd
Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA CIFS or NFS Network share or a local path
share_user No NA NA
Network share user in the format
'user@domain' or 'domain\user' if user is part
of a domain else 'user'. This option is
mandatory for CIFS Network share.
share_password/
share_pwd
No NA NA
Network share user password. This option is
mandatory for CIFS Network share.
share_mnt No NA NA
Local mount path of the network share with
read-write permission for Ansible user. This
option is mandatory for CIFS or NFS
Network share.
action No create
• create
• delete
• modify
This value decides whether to create or
delete or modify iDRAC user
user_name No NA NA
Provide the username to be created or
deleted or modified
user_password No NA NA
Provide the password for the user to be
created or modified
privilege_users No NA
• NoAccess
• Readonly
• Operator
• Administrator
Privilege user access is configurable
ipmilanprivilege_users No NA
• No_Access
• Administrator
• Operator
• User
IPMI Lan Privilege user access is configurable
ipmiserialprivilege_users No NA
• No_Access
• Administrator
• Operator
• User
IPMI Serial Privilege user access is
configurable
NOTE: This parameter is not
supported by PowerEdge Modular
servers.
enable_users No NA
• Enabled
• Disabled
Enabling or Disabling the new iDRAC user
solenable_users No NA
• Enabled
• Disabled
Enabling or Disabling SOL for iDRAC user
protocolenable_users No NA
• Enabled
• Disabled
Enabling or Disabling protocol for iDRAC user
authenticationprotocol_u
sers
No NA
• T_None
• SHA
• MD5
Configuring authentication protocol for
iDRAC user
privacyprotocol_users No NA • T_None Configuring privacy protocol for iDRAC user
24 Modules for iDRAC