Users Guide

Table 76. ome_application_network_address (continued)
Parameter Required Default Choices Comments
interface_name False NA NA
• If there are multiple interfaces, network configuration
changes can be applied to a single interface using the
interface name of the NIC.
• If this option is not specified, the primary interface is
chosen by default.
ipv4_configuration False NA ipv4 options IPv4 network configuration
NOTE: Ensure that you have an alternate
interface to access OpenManage Enterprise as
these options can change the current IPv4
address for I(hostname).
Suboptions:
• enable: Enable or disable access to the network using
IPv4.
• enable_dhcp: Enable or disable the automatic request
to get an IPv4 address from the IPv4 Dynamic Host
Configuration Protocol (DHCP) server.
If this option is true, then OpenManage Enterprise
retrieves the IP configuration—IPv4 address, subnet
mask, and gateway from a DHCP server on the
existing network.
• static_ip_address: Static IPv4 address. This option is
applicable when I(enable_dhcp) is false.
• static_subnet_mask: Static IPv4 subnet mask address.
This option is applicable when I(enable_dhcp) is false.
• static_gateway: Static IPv4 gateway address. This
option is applicable when I(enable_dhcp) is false.
• use_dhcp_for_dns_server_names: This option allows
to automatically request and obtain a DNS server IPv4
address from the DHCP server. This option is
applicable when I(enable_dhcp) is true.
• static_preferred_dns_server: Static IPv4 DNS
preferred server. This option is applicable when
I(use_dhcp_for_dns_server_names) is false.
• static_alternate_dns_server: Static IPv4 DNS
alternate server. This option is applicable when
I(use_dhcp_for_dns_server_names) is false.
ipv6_configuration
False NA ipv6 options IPv6 network configuration
NOTE: Ensure that you have an alternate
interface to access OpenManage Enterprise as
these options can change the current IPv6
address for I(hostname).
Suboptions:
• enable: Enable or disable access to the network using
IPv6.
• enable_auto_configuration: Enable or disable the
automatic request to get an IPv6 address from the
IPv6 DHCP server or router advertisements(RA).
If I(enable_auto_configuration) is true, then
OpenManage Enterprise retrieves the IP configuration
—IPv6 address, prefix, and gateway, from a DHCPv6
server on the existing network.
106 Modules for OpenManage Enterprise (OME)