Owners Manual

Figure 65. Removing the left control panel

Next steps

1. Install the left control panel

2. Follow the procedures in After working inside your system.

Installing the left control panel

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedures in Before working inside your system.

Steps

1. Route the control panel cable through the side wall and the guide slots in the system and connect it to the system board.

NOTE: Route the cable properly to prevent the cable from being pinched or crimped.

2. Align and insert the left control panel assembly in the slot on the system.

3. Using the appropriate screwdriver, tighten the screws that secure the left control panel.

Installing and removing system components