Owners Manual

Figure 42. Removing the PERC card

Next steps

1. Install the PERC card

Installing the PERC card

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedures in Before working inside your system.

3. Remove the expansion card riser.

Steps

1. Connect the PERC cable to the PERC card.

2. Flip and insert the PERC card in the PERC card slot.

3. Press the tab on the blue release latch to disengage it from the slot on the system.

4. Rotate the blue release latch until it locks with the PERC card.

5. Secure the blue release latch with a screw.

Installing and removing system components