Owners Manual

Next steps
1. Follow the procedures in After working inside your system.
Removing an expansion card from the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedures in Before working inside your system.
3. Disconnect any cables connected to the expansion card or expansion card riser.
4. Remove the expansion card riser.
Steps
1. Flip the expansion card riser to locate the connectors on the riser.
2. Holding the card by its edges, remove the expansion card from the expansion card riser.
Figure 39. Removing the expansion card from the expansion card riser
3. If you are removing the card permanently, install a filler bracket in the empty expansion card slot.
Figure 40. nstalling the expansion card filler
Next steps
1. Install the expansion card into the expansion card riser.
Installing and removing system components
69