Owners Manual

Figure 37. Installing the expansion card riser filler

Next steps

1. Install the expansion card riser.

Installing the expansion card riser

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Follow the procedures in Before working inside your system.

3. Remove the air shroud

4. If removed, Install the expansion card into the riser

5. Open the expansion card riser latch

Steps

1. Align the guide on the expansion card riser with the guide pin on the system board and lower the riser until it is firmly seated.

2. Close the expansion card riser latch.

Figure 38. Installing the expansion card riser

Installing and removing system components