Owners Manual

Figure 41. nstalling the expansion card filler
Next steps
1. Install the expansion card into the expansion card riser.
Installing an expansion card into the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedures in Before working inside your system.
3. Remove the expansion card riser.
4. If installed, remove the filler bracket.
Steps
1. Flip the expansion card riser to locate the connectors on the riser.
2. Holding the card by its edges, align and insert the expansion card in the connector on the expansion card riser.
3. If applicable, connect the cables to the expansion card.
Figure 42. Installing the expansion card in the expansion card riser
Next steps
1. Install the expansion card riser.
2. Follow the procedures in After working inside your system.
70
Installing and removing system components