Users Guide

Figure 6. VEP1405 series wall mount bracket installation - cross-shaped cutout
Rack-mounted installation
As an option, the VEP1405 series can be mounted to a dual rack mount tray. Purchased separately, you can install the VEP1405 series to
the dual rack mount tray using a torque screwdriver and the eight M3 screws included.
NOTE:
When driving the screws into the bracket and VEP1405 series unit, verify that 5 lb-in is the achieved torque
setting.
NOTE: If mounting the VEP1405 series to a dual rack mount tray, removal of the rubber feet from the bottom of the
VEP1405 series unit is not necessary.
Figure 7. VEP1405 series rack mount installation
Figure 8. VEP1405 series rack installation - front and back view
Site Preparations
9