Users Guide

Site Preparations

The Virtual Edge Platform 1405 series of systems, or VEP1405, are a universal customer premise equipment (uCPE) devices. The

VEP1405 series connects the service provider edge or small to medium branch locations to the cloud, to host virtual network functions.

For more information about VEP1405 series specifications, see the Chassis physical design section.

Topics:

• Site selection

• Chassis mounting

• Fans and airflow

• Power

• Storing components

Site selection

Ensure that the area where you install your platform meets the following safety requirements:

• Near an adequate power source

• Connected to a properly grounded power outlet

WARNING:

The VEP1405 series of systems AC power cord must be connected to a socket outlet that has properly wired

earth ground.

• Environmental—platform location—continuous temperature range is 0–40°C (32–104°F)

• Operating humidity:

○ 5% to 85% (RH), noncondensing continuously

○ 5% to 90% (RH), noncondensing Short term (< 1% of operational hour per year)

• In a dry, clean, well-ventilated, and temperature-controlled room, away from heat sources such as hot air vents or direct sunlight

• Away from sources of severe electromagnetic noise

• In a location that enables the VEP1405 series of systems to be out of direct view within the workplace

For more information about platform storage and environmental temperatures, see Specifications.

Chassis mounting

The VEP1405 series supports the following mounting options:

• Desktop placement (rubber feet)

• Wall mount placement

• Rack-mounted using the optional rack mount tray

Desktop placement

The VEP1405 series includes four rubber feet that provide secure and stable placement of the unit on a flat surface.

6 Site Preparations