Users Guide

About this Guide

This guide provides site preparation recommendations, step-by-step procedures for rack and desk mounting, inserting modules, and

connecting to a power source for the Virtual Edge Platform (VEP) 1425, 1445, and 1485 systems.

CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.

WARNING: Only trained and qualified personnel can install this equipment. Read this guide before you install and power

up this equipment. This equipment contains one power cable. Disconnect the power cable before servicing.

WARNING: This equipment supports optical transceivers, which comply with the limits of Class 1 laser radiation.

Figure 1. Class 1 laser product tag

WARNING:

When the SFP transceiver is plugged in and a cable is not connected, visible and invisible laser radiation may

be emitted from the aperture of the optical transceiver ports. Avoid exposure to laser radiation, and do not stare into

open apertures.

Table 1. Regulatory compliance information for the VEP1405 series of systems

Marketing model

number

Regulatory model

number

Regulatory type

number Remarks

VEP1425 E42W E42W001 4-core, 120G SSD

VEP1445 E42W E42W001 8-core, 240G/960G SSD

VEP1485 E42W E42W001 16-core, 240G/2TB SSD

Topics:

• Related documents

• Information symbols