Users Guide

6. Power connection port
NOTE: To prevent the VEP1405 series system console port from being accessed in a nonsecure location, the system
ships from the factory with a plate covering the micro USB port. To uncover the port, use a #0 (2.5 mm) Phillips head
screwdriver to loosen or remove the screw that holds the plate in place.
Figure 11. VEP1405 series back view (without port cover)
1. Micro USB port
2. Reset button
NOTE: See the Reset button behavior table below for more information.
3. LED status indicators for SFP+ ports
4. SFP+ ports
5. Ethernet ports and LED status indicators
6. Power connection port
Table 4. Back view system status indicator LED behavior
Class Behavior
1000M Base-T LED
• Link LED - Green or amber
○ Solid green - Port is linked and running at maximum 1000M speed on Base-T
port
○ Solid amber - Port is linked and running at lower 100M or 10M speed on Base-T
port
○ Off - No link
• Activity LED - Green
NOTE: The LED flashes green during port activity.
○ Off - no port activity
SFP+ LED
• Link LED - Green or amber
○ Solid green - Port is linked and running at 10G speed
○ Solid amber - Port is linked and running at 1G speed
○ Off - No link
• Activity LED - Green
NOTE: The LED flashes green during port activity.
○ Off - no port activity
Table 5. Reset button behavior
Action Behavior
Press the Reset button for less than 5 seconds:
• System reboots
Press the Reset button for more than 5 seconds:
• System reboots
14 Specifications