Release Notes

Product description
The Dell EMC Virtual Edge Platform (VEP) 1405 is a next-generation access platform family. The products within the VEP1405
line are built for edge compute, such as uCPE, SD-WAN, and ROBO. The VEP1405 product line consists of the five models that
are described in the table below.
The VEP1405 is the second product that is launched in the VEP family. The VEP1405 line is a cost-optimized platform with a
lower performance level than the previously released VEP4600 platform. The VEP1405 platform is built for various edge use
cases with the first proof point being an SD-WAN appliance for Versa, followed by the universal CPE use case with ADVA,
OneAccess, VMware vSphere, and RAD vCPE operating systems.
The Dell EMC SD-WAN appliances support VeloCloud, however, the VEP1405 platform line does not support VeloCloud.
The VEP1405 is built around the Intel Denverton set of processors as defined in the following table:
Table 1. Dell EMC Virtual Edge Platform (VEP) 1405 model descriptions
Model SKU CPU Description
VEP1425 210-AREH 4-core
● 8 GB DDR4
● 16 GB eMMC
● 120 GB SSD
● 2x 2 Wi-Fi
● 6x 1 GB Copper RJ45
● 2x 10 GB SFP+
● Versa software installed
● Trusted Platform Module (TPM) 2.0 - World-wide except China
● 2x USB 3.0
● Low-energy Bluetooth (BLE)
● One fan
VEP1425N 210-BCBE 4-core
● 8 GB DDR4
● 16 GB eMMC
● 120 GB SSD
● 6x 1 GB Copper RJ45
● 2x 10 GB SFP+
● Versa software installed
● Trusted Platform Module (TPM) 2.0 - World-wide except China
● 2x USB 3.0
● One fan
VEP1445 210-ASHR 8-core
● 16 GB DDR4
● 16 GB eMMC
● 240 GB SSD
● 2x 2 Wi-Fi
● 6x 1 GB Copper RJ45
● 2x 10 GB SFP+
● Versa software installed
● Trusted Platform Module (TPM) 2.0 - World-wide except China
● 2x USB 3.0
● Low-energy Bluetooth (BLE)
● Two fans
VEP1445 210-AWIP 8-core
● 32 GB DDR4
● 16 GB eMMC
● 960 GB SSD
1
4 Product description