Users Guide
Table Of Contents
- Dell EMC Networking Virtual Edge Platform 1405 Series Getting Started Guide
- Contents
- About this Guide
- Site Preparations
- VEP1405 Series Installation
- Specifications
- Chassis physical design
- Safety standards and compliance agency certifications
- Product recycling and disposal
- Agency compliance
- USA Federal Communications Commission statement
- Industry Canada Statement
- Radiocommunication equipment compliance for Thailand
- Brasil – Aviso da Anatel
- European Union EMC directive conformance statement
- Japan VCCI compliance for Class A equipment
- Korean certification of compliance
- Mexico certification of compliance
- Taiwanese certification of compliance
- Singapore certification of compliance
- Support
Site Preparations
The Virtual Edge Platform 1405 series of systems, or VEP1405, are a universal customer premise equipment (uCPE) devices.
The VEP1405 series connects the service provider edge or small to medium branch locations to the cloud, to host virtual
network functions.
For more information about VEP1405 series specifications, see the Chassis physical design section.
Site selection
Ensure that the area where you install your platform meets the following safety requirements:
● Near an adequate power source
● Connected to a properly grounded power outlet
WARNING: The VEP1405 series of systems AC power cord must be connected to a socket outlet that has
properly wired earth ground.
● Environmental—platform location—continuous temperature range is 0–40°C (32–104°F)
● Operating humidity:
○ 5% to 85% (RH), noncondensing continuously
○ 5% to 90% (RH), noncondensing Short term (< 1% of operational hour per year)
● In a dry, clean, well-ventilated, and temperature-controlled room, away from heat sources such as hot air vents or direct
sunlight
● Away from sources of severe electromagnetic noise
● In a location that enables the VEP1405 series of systems to be out of direct view within the workplace
For more information about platform storage and environmental temperatures, see Specifications.
Chassis mounting
The VEP1405 series supports the following mounting options:
● Desktop placement (rubber feet)
● Wall mount placement
● Rack-mounted using the optional rack mount tray
Desktop placement
The VEP1405 series includes four rubber feet that provide secure and stable placement of the unit on a flat surface.
Figure 2. VEP1405 series desktop placement
2
6 Site Preparations