Users Guide

About this Guide

This guide provides site preparation recommendations, step-by-step procedures for rack and desk mounting, inserting modules,

and connecting to a power source for the Dell EMC Networking Virtual Edge Platform (VEP) 1405 series of systems.

CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this

equipment.

WARNING: Only trained and qualified personnel can install this equipment. Read this guide before you install

and power up this equipment. This equipment contains one power cable. Disconnect the power cable before

servicing.

WARNING: This equipment supports optical transceivers, which comply with the limits of Class 1 laser radiation.

Figure 1. Class 1 laser product tag

WARNING:

When the SFP transceiver is plugged in and a cable is not connected, visible and invisible laser

radiation may be emitted from the aperture of the optical transceiver ports. Avoid exposure to laser radiation,

and do not stare into open apertures.

Table 1. Regulatory compliance information for the VEP1405 series of systems

Marketing model

number

Regulatory model

number

Regulatory type

number Remarks

VEP1425/VEP1425N E42W E42W001 4-core, 120G SSD

VEP1445/VEP1445N E42W E42W001 8-core, 240G/960G SSD

VEP1485/VEP1485N E42W E42W001 16-core, 240G/2TB SSD

NOTE: The VEP1425N, VEP1445N, and VEP1485N system models do not include wireless or Bluetooth capabilities.