Users Guide
Table Of Contents
- Dell EMC Networking Virtual Edge Platform 1405 Series Getting Started Guide
- Contents
- About this Guide
- Site Preparations
- VEP1405 Series Installation
- Specifications
- Chassis physical design
- Safety standards and compliance agency certifications
- Product recycling and disposal
- Agency compliance
- USA Federal Communications Commission statement
- Industry Canada Statement
- Radiocommunication equipment compliance for Thailand
- Brasil – Aviso da Anatel
- European Union EMC directive conformance statement
- Japan VCCI compliance for Class A equipment
- Korean certification of compliance
- Mexico certification of compliance
- Taiwanese certification of compliance
- Singapore certification of compliance
- Support
Figure 11. VEP1405 series back view (without port cover)
1. Micro USB serial console port
2. Reset button
NOTE: See the Reset button behavior table below for more information.
3. LED status indicators for SFP+ ports
4. SFP+ ports
5. Ethernet ports and LED status indicators
6. Power connection port
Table 4. Back view system status indicator LED behavior
Class Behavior
1000M Base-T LED
● Link LED - Green or amber
○ Solid green - Port is linked and running at maximum 1000M
speed on Base-T port
○ Solid amber - Port is linked and running at lower 100M or 10M
speed on Base-T port
○ Off - No link
● Activity LED - Green
NOTE: The LED flashes green during port activity.
○ Off - no port activity
SFP+ LED
● Link LED - Green or amber
○ Solid green - Port is linked and running at 10G speed
○ Solid amber - Port is linked and running at 1G speed
○ Off - No link
● Activity LED - Green
NOTE: The LED flashes green during port activity.
○ Off - no port activity
Table 5. Reset button behavior
Action Behavior
Press the Reset button for less than 5 seconds:
● System reboots
Press the Reset button for more than 5 seconds:
● System reboots and system is reset to factory defaults
● Status indicator LED color changes to blue
● Flag indicating a long push is set by the BIOS in the CMOS RAM
● Flag allows user to have the operating system detect a long button
push
14 Specifications