Release Notes

CPU Signature 506F1

CPU FamilyID=6, Model=5F, SteppingId=1, Processor=0

Microcode Revision 2E

Platform ID: 0x0

PMG_CST_CFG_CTL: 0x37

Misc EN: 0x840089

Gen PM ConA: 0xA0A00200

Therm Status: 0x8000000

POST Control=0xEA000301, Status=0xE600DF00

BIOS initializations...

CPGC Memtest Channel 0 ...................... PASS

CPGC Memtest Channel 1 ...................... PASS

4. During the installation process, select eMMC rather than SSD for the installation of the diagnostics partition.

Configure BIOS and boot into DIAG OS

After the DIAG OS installation completes, configure the BIOS then boot into the DIAG OS.

1. Boot into the BIOS setting.

2. Configure Boot Option #1 from the Boot Configuration screen.

Figure 14. Boot configuration screen

3. Press the F4 key to save the changes and exit the utility.

4. Confirm saving the configuration using the left and right arrow keys, and exit from the utility. Select Yes and press Enter.

Figure 15. Save & exit

After you save the changes the log in command prompt displays.