Release Notes

Figure 8. POST test

LED test

Within Test mode, the LED test option allows you to select the color of the system LED lights on the front panel:

● None

● Green

● Yellow

To adjust these settings, go to the BIOS setup screen, use the arrow keys to select the Advanced tab, select POST test, and

then select the LED test option.

Figure 9. LED test screen

Restore defaults

NOTE:

By restoring the system to the original default settings, any assigned system passwords will be restored to the

original default password. See the BIOS setup section in this document for information about the original default password.

To restore the system to the original default settings:

1. From the BIOS setup screen, use the arrow keys to select the Save & Exit tab.

2. Use the arrow keys to select the Restore Defaults option and press Enter. The Load Optimized Defaults? screen displays.