Install Guide
Table Of Contents
- Virtual Edge Platform 1405 Series Operating System Installation Guide
- Contents
- Introduction
- Create a serial console connection
- Create bootable USB drive
- Configure BIOS and install Ubuntu 18.04 operating system to SSD
- Configure BIOS and install Red Hat Enterprise Linux operating system to SSD
- Configure BIOS and install ADVA 18.4 operating system installation to SSD
- Download and install VMware ESXi 7.0
- LTE modem detection
Figure 28. CentOS SATA Flash Drive selection screen
4. Using the arrow keys, select the Save & Exit tab.
5. Highlight the Save Changes and Exit listing, then press the Enter key.
The Save & Exit Setup window displays.
6. Highlight Yes then press the Enter key.
Figure 29. Save configuration confirmation screen
The system starts to boot. The ADVA login screen displays.
24
Configure BIOS and install ADVA 18.4 operating system installation to SSD