Setup Guide

70 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
Cisco Nexus 3232C Leaf 1
Cisco Nexus 3232C Leaf 2
vpc domain 255
peer-keepalive destination 100.67.162.200
interface port-channel255
switchport
switchport mode trunk
vpc peer-link
interface Ethernet1/29
description vPC Interconnect
switchport
switchport mode trunk
channel-group 255 mode active
no shutdown
interface Ethernet1/31
description vPC Interconnect
switchport
switchport mode trunk
channel-group 255 mode active
no shutdown
vpc domain 255
peer-keepalive destination 100.67.162.201
interface port-channel255
switchport
switchport mode trunk
vpc peer-link
interface Ethernet1/29
description vPC Interconnect
switchport
switchport mode trunk
channel-group 255 mode active
no shutdown
interface Ethernet1/31
description vPC Interconnect
switchport
switchport mode trunk
channel-group 255 mode active
no shutdown
Enter the following commands to configure the port channels to connect to the downstream MX9116n FSEs.
Then, exit configuration mode and save the configuration.
Cisco Nexus 3232C Leaf 1
Cisco Nexus 3232C Leaf 2
interface port-channel1
description To MX Chassis
switchport
switchport mode trunk
switchport trunk allowed vlan 1,10
vpc 255
interface Ethernet1/1
description To MX Chassis 1
switchport
switchport mode trunk
switchport trunk allowed vlan 1,10
channel-group 1 mode active
no shutdown
interface Ethernet1/3
description To MX Chassis 2
switchport
switchport mode trunk
switchport trunk allowed vlan 1,10
channel-group 1 mode active
no shutdown
end
copy running-configuration startup-configuration
interface port-channel1
description To MX Chassis
switchport
switchport mode trunk
switchport trunk allowed vlan 1,10
vpc 255
interface Ethernet1/1
description To MX Chassis 1
switchport
switchport mode trunk
switchport trunk allowed vlan 1,10
channel-group 1 mode active
no shutdown
interface Ethernet1/3
description To MX Chassis 2
switchport
switchport mode trunk
switchport trunk allowed vlan 1,10
channel-group 1 mode active
no shutdown
end
copy running-configuration startup-configuration