Setup Guide

63 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
9 Scenario 1 - SmartFabric deployment with Dell EMC
PowerSwitch Z9100-ON upstream switches
Figure 63 shows the production topology using a pair of Dell EMC PowerSwitch Z9100-ONs as upstream
switches. This section walks through configuring the Z9100-ONs as well as validating the Z9100-ON
configuration.
18 2014 1610 126 82 4 30 3226 2822 24
17 1913 159 115 71 3 29 3125 2721 23
33
SFP+
34SFP+
Stack ID
EST
18 2014 1610 126 82 4 30 3226 2822 24
17 1913 159 115 71 3 29 3125 2721 23 33SFP+
34SFP+
Stack ID
EST
Z9100-ON Leaf 2
Z9100-ON Leaf 1
VLTi (100 GbE)
Fabric uplink (100 GbE)
FSE to FEM (200 GbE)
FSE VLTi (200 GbE)
MX9116n FSE
MX7116n FEM
MX7116n FEM
MX9116n FSE
VLTi
VLTi
SmartFabric with Dell EMC PowerSwitch Z9100-ON leaf switches
NOTE: See Appendix A.10 for more information on QSFP28-DD cables.