Setup Guide

52 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
Toggle Admin State
7.3 Upgrading OS10EE
Upgrading the IOMs in the fabric can be done using the OME-M console. The upgrade is carried out using the
DUP file. The DUP is available for download from Support for Dell EMC Products
.
Download DUP file for MX9116n FSE
When a single IOM is selected for firmware upgrade, the IOMs that are part of a fabric will also get their
firmware updated.
NOTE: If an IOM is in SmartFabric mode, it leads to an upgrade of firmware of all IOMs that are part of the fabric.
If an IOM is in Full Switch mode, firmware upgrade is completed only on the specific IOM selected.
To upgrade the IOMs that are part of a fabric, follow the steps below:
1. From the switch management page, choose Firmware > Update Firmware. In the Update
Firmware dialog box, browse and select the appropriate DUP file.