Setup Guide

51 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
Port information
2. To configure MTU, select the port listed under the respective port-group.
3. Click Configure MTU. Enter MTU size in bytes.
4. Click Finish.
Configure MTU
5. To configure Auto Negotiation, select the port listed under the respective port-group. Click Toggle
AutoNeg. This will change the Auto Negotiation of the port to Disabled/Enabled. Click Finish.
Enable/Disable Auto Negotiation
6. To configure the administrative state (shut/no shut) of a port, select the port listed under the
respective port-group. Click Toggle Admin State. This will toggle the port’s administrative state to
Disabled/Enabled state.
7. Click Finish.