Setup Guide

43 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
Add/remove VLANs
5. Choose the desired server. In this example PowerEdge MX740C with service tag 8XQP0T2 is
selected.
6. Choose Edit Networks.
7. Modify the VLAN selections as required by defining the tagged and untagged VLANs.
8. Select VLANs on Tagged and Untagged Network for each Mezzanine card port.
9. Click Save.
Modify VLANs
NOTE: At this time, only one server can be selected at a time in the GUI.