Setup Guide

39 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
ISL Links are the VLT interconnects between the two switches. The ISL links should be connected on port
groups 11 and 12 on MX9116n switches, and ports 9 and 10 on MX5108n switches. This is a requirement
and failure to connect the defined ports will result in a fabric validation error.
ISL Links
6.2 Editing the fabric
A fabric has four components:
• Uplinks
• Switches
• Servers
• ISL Links
Editing the fabric discussed in this section includes editing the fabric name and description.
To edit the name of the fabric that was created, follow the steps below:
1. Open the OME-M console.
2. From the navigation menu, click Devices > Fabric.
3. On the right, Click the Edit button.