Setup Guide

36 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
5.4 Associate server template with networks
After successfully creating a new template, associate the template with a network:
1. From the Deploy pane, select the template to be associated with VLANs. In this example, R740c
with Intel mezzanine server template is selected.
2. Click Edit Network.
3. In the Edit Network window, complete the following:
a. Optionally, from the Identity Pool list, choose the desired identity pool. In this example, Ethernet
ID Pool is selected.
b. For both ports, from the Untagged Network list, select the untagged VLAN. In this example,
VLAN0001 is selected.
c. For both ports, from the Tagged Network list, select the tagged VLAN. In this example,
VLAN0010 is selected.
d. Click Finish.
Figure 20 shows the associated networks for the server template.
Server template network settings
5.5 Deploy a server template
To deploy the server template, complete the following steps:
1. From the Deploy pane, select the template to be deployed. In this example, R740c with Intel
mezzanine server template is selected.
2. Click Deploy Template.
3. In the Deploy Template window, complete the following:
a. Click the Select button to choose which slots or compute sleds to deploy the template to.
b. Select the Do not forcefully reboot the host OS option.
c. Click Next.
d. Choose Run Now
e. Click Finish.
The interfaces on the MX9116n FSE are updated automatically. SmartFabric configures each interface with
an untagged VLAN and any tagged VLANs. Additionally, SmartFabric deploys associated QoS settings. See
Section 2.6.3
for more information.