Setup Guide

34 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
NOTE: In SmartFabric mode, you must use a template to deploy a server and to configure the networking.
To create a server template, follow these steps:
1. Open the OME-M console.
2. From the navigation menu, click Configuration, then click Deploy.
3. From the center panel, click Create Template, then click From Reference Device to open the
Create Template window.
4. In the Template Name box, enter a name. In this example, “M740c with Intel mezzanine” is entered.
Create Template dialog box
5. Optionally, enter a description in the Description box, then click Next.
6. In the Device Selection section, click Select Device.
7. From the Select Devices window, choose the server previously configured, then click Finish.
8. From the Elements to Clone list, select all the elements, and then click Finish.