Setup Guide

121 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
D.4 Reset an OS10EE switch to factory defaults
To reset OS10EE switches back to the factory default configuration, enter the following commands:
OS10# delete startup-configuration
Proceed to delete startup-configuration [yes/no(default)]:yes
OS10# reload
System configuration has been modified. Save? [yes/no]:no
Proceed to reboot the system? [confirm yes/no]:yes
The switch reboots with default configuration settings.
D.5 Reset Cisco Nexus 3232C to factory defaults
To reset the Cisco Nexus 3232C switches to the factory default configuration, enter the following commands:
3232C# write erase
Warning: This command will erase the startup-configuration.
Do you wish to proceed anyway? (y/n) [n] y
After the next reboot the switch loads with default configuration settings.