Setup Guide

106 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
A.4 Dell EMC PowerEdge MX9002m module
The Dell EMC MX9002m module controls overall chassis power, cooling, and hosts the OME-M console. Two
external Ethernet ports are provided to allow management connectivity and to connect additional MX7000
chassis in a single logical chassis. An MX7000 supports two MX9002m modules for redundancy. Figure 98
shows a single MX9002m module and its components.
Dell EMC PowerEdge MX9002m module
The following MX9002m module components are labeled in Figure 98.
1. Handle release
2. Gigabit Ethernet port 1 (Gb1)
3. Gigabit Ethernet port 2 (Gb2)
4. ID button and health status LED
5. Power status LED
6. Micro-B USB console port
NOTE: In this document, two MX9002m modules are used in each MX7000 chassis.