Users Guide

Table Of Contents
remote-vtep
ip-address
Display MAC addresses learned from the specified remote VTEP.
Default Not configured
Command mode EXEC
Usage information Use the clear mac address-table dynamic nve remote-vtep command to delete all MAC address
entries learned from a remote VTEP. Use the clear mac address-table dynamic virtual-network
vn-id command to delete all dynamic MAC address entries learned on a virtual-network bridge.
Example
OS10# show mac address-table nve remote-vtep 32.1.1.1
Virtual-Network VNI MAC Address Type Remote-VTEP
---------------------------------------------------------------
10000 9999 00:00:00:00:00:77 dynamic VxLAN(32.1.1.1)
20000 19999 00:00:00:00:00:88 dynamic VxLAN(32.1.1.1)
OS10# show mac address-table nve vxlan-vni 9999
Virtual-Network VNI MAC Address Type Remote-VTEP
---------------------------------------------------------------
10000 9999 00:00:00:00:00:77 dynamic VxLAN(32.1.1.1)
Supported
releases
10.4.2.0 or later
show mac address-table virtual-network
Displays the MAC addresses learned on all or a specified virtual network.
Syntax
show mac address-table virtual-network [vn-id | local | remote | static |
dynamic | address mac-address | interface {ethernet node/slot/port:subport |
port-channel number}]
Parameters
vn-id
Display only information about the specified virtual network.
local
Display only locally learned MAC addresses.
remote
Display only remote MAC addresses.
static
Display only static MAC addresses.
dynamic
Display only dynamic MAC addresses.
address mac-
address
Display only information about the specified MAC address. Enter the MAC address in
EEEE.EEEE.EEEE format.
interface
ethernet node/
slot/
port[:subport]
Display only MAC addresses learned on the specified interface.
interface
port-channel
number
Display only MAC addresses learned on the specified port channel.
Default Not configured
Command mode EXEC
Usage information Use this command to verify the MAC addresses learned on VXLAN virtual networks. By default, MAC learning
from a remote VTEP is enabled.
Example
OS10# show mac address-table virtual-network
Virtual-Network VlanId MAC Address Type Interface/Remote-VTEP
----------------------------------------------------------------------
10000 00:00:00:00:00:11 dynamic ethernet1/1/31:1
10000 100 00:00:00:00:00:44 dynamic port-channel1000
10000 100 00:00:00:00:00:55 dynamic port-channel10
VXLAN 821